iTest - Bilt System - BE2100 series

products	► BE2100 Series: Very High End DC Sources
	► BE2140 Series: Very High End Multichannel Sources

Very High Resolution Ultra Low Noise DC Source
BE2100, ±12V ±200mA High Resolution: 21 bits, 6 ½ digits High Stability: 7ppm typ. /24-hour High Accuracy: ±0.01% typ. /one year Ultra Low Noise: ≤9µVp-p typ.
True 4-quadrant isolated modular DC source with sense lines 2 voltage ranges: ±1,2V and ±12V, current up to ±200mA Very fast warm-up time, 10 minutes max. 2 programmable output filters to optimize output noise and settling time “Ready” output signal indicates optimal accuracy reached on output voltage Excellent load regulation, typ. error <10µV (12V range) Programmable ramp or staircase waveform, synchronization between sources (external trigger) 2 source models: BE2101, standard module (source outputs on the module's front panel) or BE2102, miniature remote source (standard 4-meter cable) Cost effective: up to 13 source modules in a single Bilt chassis, 3 chassis sizes available: 5, 8 or 13 slots	BE2100 Serie DC Sources Brochure
Applications Designed with and for scientists, BE2100 DC sources are particularly well suited to scientific experimental setups. Polarization of nanoscale, mesoscopic, nanotube, graphene, molecular, quantum devices … Small superconducting coil Ultra low level pressure and temperature sensors High end power supplies for electronic devices, communication devices, micro-wave devices, signal converters (ADC,DAC), imaging devices, etc… battery replacement for ultra-low noise application. Application note: "A smart voltage sweep" Application note: "Very low noise sources for physics applications requiring a superconducting magnet "	Designed in partnership with french LPA-ENS Laboratory*, the BE2100 sources were the subject of a presentation poster by David DARSON during 'CNRS - Mesoscopic Quantum Physics - meeting' in Aussois (France) on December 2011. LPA BE2100 Sources Poster.

products ► BE2100 Series: Very High End DC Sources

Very High Resolution Ultra Low Noise 4 channel DC Source
BE2141, ±12V ±15mA High Resolution: down to 1.2µV (21 bits, 6 ½ digits) High Stability: a few ppm within 24-hour High Accuracy: ±0.02% typ. /one year Ultra Low Noise: ≤ 5µVp-p typ (<1µV RMS).
4 independent 4-quadrant isolated DC voltage sources. 2 voltage ranges: ±1,2V and ±12V, current up to ±15mA. Current measurement option available, ref BE2142. No more than the output noise of a low-noise operational amplifier: 3nV/√Hz at 1kHz. Programmable settling: exponential, ramp or staircase, synchronization between channels and with other modules. Cost effective: up to 52 channels in a single Bilt chassis. BE2140 Serie DC Sources, Brochure. Application note: "Very low noise sources for physics applications requiring a superconducting magnet "
* The BE2140 high accuracy DC sources are designed, manufactured and distributed by iTest.